Baby reaches for the stars and Bear lifts little one high on his arm... These sweet bears will undoubtedly steal your heart. Animals to cuddle! Wall sticker Baby & Bear is painted as watercolor and printed on high-quality self-adhesive vinyl foil. Sticking is easy and you can easily iron out air bubbles. The sticker is matte glossy and deep in color.

Once stuck, Baby & Bear can still be removed, but moving it several times is not possible. So measure carefully in advance where you will stick Baby & Bear animals!
Wait at least 3 weeks before sticking the wall sticker on the painted wall.

NB! We cannot guarantee adhesion of the sticker on a structured wall. Too much air then gets under the sticker, which can cause it to come off (eventually). For a structured wall, we recommend placing the sticker on a panel , see a tutorial below:

STEP 1
Place the wall sticker on a piece of wood. Make sure the surface is clean. After placing it on the material, you need to cut it along the lines. In this case it was decided to also cut off the white edge.

STEP 2
Sand the edges carefully. In this case, a piece of 360 grit sandpaper was used.

STEP 3
To get the best result, we recommend coloring the edges with a marker that matches the MDF with the color of the animal. Here, brown was used to imitate the bear's fur.

STEP 4
Find the right place for the wall sticker on your wall. We recommend using double-sided tape or 3M mounting strips.

STEP 5
That's all. You're done and can enjoy the stunning results.